D21G with Raspbian

Hi there,

I need some help to configure the D21G on Raspbian. In Windows IDE everything is working fine, but i need to flash a sketch remotely over linux shell. So I installed the SAMD package with the board manager and in Windows I would install the driver as explained but what to do know now in linux? The D21G does not appear in the boards list...

regards

Christian

Christian
Christian
0
| 0 0 0
Asked on 6/30/18, 8:57 AM
0
vote
250 Views

Hi, in Linux no additional driver needs to be installed. Did you install the Industruino D21G board package through the board manager in the Arduino IDE? Actually, if your purpose is to upload a sketch remotely, you could do that with just the Industruino and its Ethernet module, making use of the TFTP bootloader as described here: https://industruino.com/blog/our-news-1/post/remote-sketch-upload-via-ethernet-27 If you still want to use a Pi, let us know if you encounter further issues.

Tom
on 7/1/18, 2:05 AM

Hi Tom,

we want to keep it as simple as possible and we would like to use a usb connection. I recognized that I installed the wrong package.
Trying to install the correct package named "Industruino SAMD Boards M0+... V1.0.1" (right?) i got different failure reports.
"Tool bossac is not available for your OS" or "Tool openocd is not available..." or "Tool CMSIS.... "
Any ideas?

Christian


Am 01.07.2018 um 04:05 schrieb Tom:
<blockquote type="cite" cite="mid:1530410741.450139999389648.732994119849878-openerp-583-forum.post@ubuntu-odoo-feb">

Hi, in Linux no additional driver needs to be installed. Did you install the Industruino D21G board package through the board manager in the Arduino IDE? Actually, if your purpose is to upload a sketch remotely, you could do that with just the Industruino and its Ethernet module, making use of the TFTP bootloader as described here: https://industruino.com/blog/our-news-1/post/remote-sketch-upload-via-ethernet-27If you still want to use a Pi, let us know if you encounter further issues.

--
Tom
Sent by Industruino using Odoo about Forum Post D21G with Raspbian
Christian
on 7/2/18, 9:32 AM

Hi, it seems other people have had similar problems with M0-style Arduino boards on the Raspberry Pi, but it might be fixed by using the latest Arduino IDE rather than the one in the Pi repository. Did you download the IDE from https://www.arduino.cc/en/Main/Software (Linux ARM)? If not, please try that. (according to https://forum.arduino.cc/index.php?topic=445623.0)

Tom
on 7/3/18, 8:57 AM
Hi Tom, Arduino IDE is 1.8.5 on Debian Stretch (Raspberry Pi 3B+). I 
have now Installed the M0+ 1.6.18 by Arduino where the D21G should be 
integrated (I did not know before). The Industruino does not exist in 
the boards.txt but i choose the MKRZERO with AVRISP mkII programmer. 
Compilation works well but while uploading the sketch I get an checksum 
verification error. Programming a serial output with Windows is also 
shown on the Raspberry IDE at ttyACM0.

Regards
Christian


Here is the IDE's output:

Erzwinge Reset durch öffnen/schließen mit 1200 bps auf dem Port /dev/ttyACM1
PORTS {/dev/ttyACM1, /dev/ttyAMA0, } / {/dev/ttyACM1, /dev/ttyAMA0, } => {}
PORTS {/dev/ttyACM1, /dev/ttyAMA0, } / {/dev/ttyAMA0, } => {}
PORTS {/dev/ttyAMA0, } / {/dev/ttyACM0, /dev/ttyAMA0, } => {/dev/ttyACM0, }
Found upload port: /dev/ttyACM0
/home/pi/.arduino15/packages/arduino/tools/bossac/1.7.0/bossac -i -d 
--port=ttyACM0 -U true -i -e -w -v 
/tmp/arduino_build_616617/iz_ndustruino_test.ino.bin -R
Set binary mode
readWord(addr=0)=0x20007ffc
readWord(addr=0xe000ed00)=0x410cc601
readWord(addr=0x41002018)=0x10010305
version()=v2.0 [Arduino:XYZ] Aug  1 2017 11:04:45
chipId=0x10010005
Connected at 921600 baud
readWord(addr=0)=0x20007ffc
readWord(addr=0xe000ed00)=0x410cc601
readWord(addr=0x41002018)=0x10010305
Atmel SMART device 0x10010005 found
write(addr=0x20004000,size=0x34)
writeWord(addr=0x20004030,value=0x10)
writeWord(addr=0x20004020,value=0x20008000)
Device       : ATSAMD21G18A
readWord(addr=0)=0x20007ffc
readWord(addr=0xe000ed00)=0x410cc601
readWord(addr=0x41002018)=0x10010305
Chip ID      : 10010005
version()=v2.0 [Arduino:XYZ] Aug  1 2017 11:04:45
Version      : v2.0 [Arduino:XYZ] Aug  1 2017 11:04:45
Address      : 8192
Pages        : 3968
Page Size    : 64 bytes
Total Size   : 248KB
Planes       : 1
Lock Regions : 16
Locked       : readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
none
readWord(addr=0x41004018)=0
Security     : false
Boot Flash   : true
readWord(addr=0x40000834)=0x7000a
BOD          : true
readWord(addr=0x40000834)=0x7000a
BOR          : true
Arduino      : FAST_CHIP_ERASE
Arduino      : FAST_MULTI_PAGE_WRITE
Arduino      : CAN_CHECKSUM_MEMORY_BUFFER
Erase flash
chipErase(addr=0x2000)
done in 0.756 seconds

Write 20596 bytes to flash (322 pages)
write(addr=0x20005000,size=0x1000)
writeBuffer(scr_addr=0x20005000, dst_addr=0x2000, size=0x1000)

[=====                         ] 19% (64/322 
pages)write(addr=0x20005000,size=0x1000)
writeBuffer(scr_addr=0x20005000, dst_addr=0x3000, size=0x1000)

[===========                   ] 39% (128/322 
pages)write(addr=0x20005000,size=0x1000)
writeBuffer(scr_addr=0x20005000, dst_addr=0x4000, size=0x1000)

[=================             ] 59% (192/322 
pages)write(addr=0x20005000,size=0x1000)
writeBuffer(scr_addr=0x20005000, dst_addr=0x5000, size=0x1000)

[=======================       ] 79% (256/322 
pages)write(addr=0x20005000,size=0x1000)
writeBuffer(scr_addr=0x20005000, dst_addr=0x6000, size=0x1000)

[============================= ] 99% (320/322 
pages)write(addr=0x20005000,size=0x80)
writeBuffer(scr_addr=0x20005000, dst_addr=0x7000, size=0x80)
Beim Hochladen des Sketches ist ein Fehler aufgetreten

[==============================] 100% (322/322 pages)
done in 0.102 seconds

Verify 20596 bytes of flash with checksum.
checksumBuffer(start_addr=0x2000, size=0x1000) = 3bd
Verify failed
Christian
on 7/3/18, 5:49 PM

Hi Christian, it seems the upload worked correctly, only the verify failed. i assume the sketch is running fine then?

can you let us know if the setup is working now? thanks- Tom

Tom
Tom
5245
| 0 0 1
Answered on 8/12/18, 4:27 AM
0
vote

Your answer

Please try to give a substantial answer. If you wanted to comment on the question or answer, just use the commenting tool. Please remember that you can always revise your answers - no need to answer the same question twice. Also, please don't forget to vote - it really helps to select the best questions and answers!

Ask a Question

Keep Informed

About This Forum

This community is for professionals and enthusiasts of our products and services.

Read Guidelines

Question tools

45 follower(s)

Stats

Asked: 6/30/18, 8:57 AM
Seen: 250 times
Last updated: 8/12/18, 4:27 AM