Can't use V5 analog in PGA mode

Demo code shows a V5 mode for Analog in, using 2x PGA of  MCP3424 chip.

But this mode can't be used due to the configuration of the analog input stage, which has the zero at 5V.

So 10V corresponds to -5 to +5.

In the 5V range, what we get is -2.5 to 2.5V, which corresponds to 2.5 to 7.5V related to ground.

In order to use the PGA function, something should be changed in the design.

The only valid use I can see is in the case of a weathstone bridge, or a resistive sensor in a divider.

In this case, could we also add x4 and x8 ranges?

I looked at the library and it is just a matter of listing.

Stefano Giuseppe Bonvini
Stefano Giuseppe Bonvini
87
| 0 0 0
Asked on 10/28/20, 12:08 PM
0
vote
42 Views

Your answer

Please try to give a substantial answer. If you wanted to comment on the question or answer, just use the commenting tool. Please remember that you can always revise your answers - no need to answer the same question twice. Also, please don't forget to vote - it really helps to select the best questions and answers!

Ask a Question

Keep Informed

About This Forum

This community is for professionals and enthusiasts of our products and services.

Read Guidelines

Question tools

62 follower(s)

Stats

Asked: 10/28/20, 12:08 PM
Seen: 42 times
Last updated: 10/28/20, 12:08 PM