How to get raw data analog

Hi Ganesh, please have a look at https://industruino.com/blog/our-news-1/post/ind-i-o-analog-calibration-18 for calibration details and procedure. If you do the full calibration (4CH input voltage, current; 2CH output voltage, current) you can afterwards use all channels as you wish without going back to the calibration; the calibration data are only used for the I/O type that you define per channel.

If you don't want to do the full calibration procedure because you already know on which channels you will use voltage or current, you can just update the values that you calibrate and leave the rest as default (as they won't be used). So to answer your question, yes it is possible to calibrate just for voltage or current if you know that's what you're going to use.

Raw readings are not affected by calibration so you should get the same 0-4096 range before/after calibration. Please check https://github.com/Industruino/libraries#analog-input

• Comment
• Edit
• Delete
• Convert as a comment

Tom

Tom

5675

| 1 1 3

Answered on 10/22/16, 1:54 AM

0

vote

Hello, there is a mode  mA_raw that you can use to get raw value with mA input.
You can set a different mode for each input.
Here are available modes from Indio library:

#define mA            1
#define V10           2
#define V5             3
#define mA_p        4
#define V10_p       5
#define V5_p         6
#define mA_raw    7
#define V10_raw   8

Hope this helps.

• Comment
• Edit
• Delete
• Convert as a comment

Stefano Giuseppe Bonvini

Stefano Giuseppe Bonvini

107

| 4 1 3

Answered on 10/18/16, 5:47 PM

0

vote