since I think of making my own baseboard,
I wonder which kind of FPC-connector and FPC-cable is used by the Industruino system ?
There are so many types and manufacturers,
which is the right one ?
now I can go on ...
Another "fundamental" question aside:
on some of your pictures of your PCBs it is shown the "open source hardware" logo.
(e.g. --> https://industruino.com/website/image/ir.attachment/177_172d2b7/datas )
Is the Industruino hardware really open source ?
And if yes where can I find the sources ? (schematics / pcb-files)
The FPC connection between topboard and baseboard is a 40 pin 0.5mm pitch FPC.
For the connector you can use this one or equivalenet: http://www.newark.com/te-connectivity-amp/4-1734839-0/ffc-fpc-connector-receptacle-40/dp/28X2749
For the cable: http://www.newark.com/molex/15166-0427/jumper-ffc-0-5mm-50mm-40way/dp/92T1545
Please try to give a substantial answer. If you wanted to comment on the question or answer, just use the commenting tool. Please remember that you can always revise your answers - no need to answer the same question twice. Also, please don't forget to vote - it really helps to select the best questions and answers!