Ethernet expansion module on the left side?

Can I connect the Ethernet expansion module on the left side of an Industruino PROTO21G? I mean, can you provide a long cable for that matter? (not the hard bridge connector that ships with the Ethernet Module)

Diego Bonfil Traver
Diego Bonfil Traver
| 0 0 0
Asked on 7/16/21, 2:48 PM

Dear Diego,

Yes, this is possible with a 14pin IDC flat cable. We don't supply these kind of cables but they can be bought on digikey/mouser/farnell as pre-assembled or separate flat cable+press-fit connectors. I would recommend to press-fit assemble the cable yourself to avoid any mistakes with polarity/pin sequence. 

A word of caution: be aware that a cable will be less immune to EMI than the connector board that we supply.

Best Regards,



Loic De Buck
Loic De Buck
| 3 1 3
Answered on 7/19/21, 8:02 AM

Your answer

Please try to give a substantial answer. If you wanted to comment on the question or answer, just use the commenting tool. Please remember that you can always revise your answers - no need to answer the same question twice. Also, please don't forget to vote - it really helps to select the best questions and answers!

Ask a Question

Keep Informed

About This Forum

This community is for professionals and enthusiasts of our products and services.

Read Guidelines

Question tools

66 follower(s)


Asked: 7/16/21, 2:48 PM
Seen: 1204 times
Last updated: 7/19/21, 8:04 AM