PROTO D21G compatible with Blynk Software

Can you please verify the PROTO D21G will work with Blynk software. I’m hoping you can download and try the app. which is free on both android and iPhone. Here is the link. 

http://www.blynk.cc/

I’m very interested in using your products but must have the remote features this software allows. Note: if it is not compatible, what other software do you recommend which has equal features. 

Thanks

MikeGroz
MikeGroz
42
| 3 1 1
Asked on 9/28/17, 11:59 PM
1
vote
2868 Views

hi, thank you for the suggestion. i have tested Blynk with the Industruino D21G and Ethernet module, and it works smoothly.

in the Blynk app, use 'Arduino Zero' as board, and 'Ethernet' as connection type.

in the sketch, use the Ethernet2 library (W5500 chip in the Ethernet module)

more info in this blog post.

Tom
Tom
5675
| 1 1 3
Answered on 9/30/17, 8:21 AM
1
vote

Tom, have you tried using the D21G & GSM/GPRS module with blynk? Thanks

MikeGroz
on 10/15/17, 2:09 AM

Forgot to include this link. https://github.com/vshymanskyy/TinyGSM/blob/master/README.md

MikeGroz
on 10/15/17, 2:39 AM

I'm using a lot of widget of Blynk with my D21G/Ethernet set up and is working nicely. I´m using graphs, buttons, RTC, Sliders, Menu, Device Selector, etc... 

Just one little trick, if you want to use more than 32 Virtual Pins, gos to BlynkConfig.h and force it uncomment the line. Also to send/receive large tex messages, uncomment the corresponding line or edit it. Hopefully they will include Industruino boards in new Blynk realeases so there will be no need to do this modifications anymore.

 

Joaquín Murillo
Joaquín Murillo
17
| 2 1 1
Answered on 2/12/18, 3:29 PM
0
vote

Same.

I am trying to send SMSs through the GPRS module (and fail piteously for now), but the next step is Blynk. Any information or code example welcome

Didier, DG2R

Didier DORGUIN
Didier DORGUIN
172
| 4 1 3
Answered on 2/8/18, 6:17 PM
0
vote

 

hi,  I'trying to use blynk with Industruino D21G and GSM module.

In the blynk app I must use 'Arduino zero' as board...

But what conectionntype must I use?

 

---------

 

 

I'm interested too.
We just get a Proto D21G and a GSM / GPRS Module in order to conect it to Blynk.
It is suposed to work, because this module has a SIM800H,  And the SIM800H is in the list of "Hardware supported by Blynk", (see the list by the end of "Arduino connection types"):
https://github.com/blynkkk/blynkkk.github.io/blob/master/SupportedHardware.md

 

The other way suposed to work is with the Ethernet expansion module, tha has inside the Wiznet W5500 controller chip.
This is also in the list of "Hardware supported by Blynk":

https://github.com/blynkkk/blynkkk.github.io/blob/master/SupportedHardware.md

whre you can find the reference of: "Arduino Ethernet Shield 2 (W5500)" in the Ethernet conextion list.

So, it is suposed to work, but I haven.t tried yet.

Has anybody any experience about this with Industruino?

Juansa
Juansa
7
| 3 1 1
Answered on 9/29/17, 3:36 PM
0
vote

Your answer

Please try to give a substantial answer. If you wanted to comment on the question or answer, just use the commenting tool. Please remember that you can always revise your answers - no need to answer the same question twice. Also, please don't forget to vote - it really helps to select the best questions and answers!

Ask a Question

Keep Informed

About This Forum

This community is for professionals and enthusiasts of our products and services.

Read Guidelines

Question tools

38 follower(s)

Stats

Asked: 9/28/17, 11:59 PM
Seen: 2868 times
Last updated: 3/2/18, 3:35 PM