RTC for Industruino "Ind.I/O" with AT90USB1286 MCU
Hello,
for my next project I wanted to use the "Ind.I/O" with AT90USB1286 MCU,
but I need a accurate realtime-clock RTC that can keep the time during the System is powered off...
any Ideas for that ?
maybe I can develop a small module (with a coin-cell), that sticks directly onto the expansion port (14-pin IDC) ?
Dear Dirk,
We are in the final stages of development for a new range of Topboards which will include an RTC. Launch is expected in February.
Please keep an eye on our website for any announcements.
Best Regards,
Loic
I got back to this topic after a while, and I finally see, that you did a new Topboard with ATSAMD21G18 MCU and independent RTC with Battery. That's really nice, I like this MCU (know it already from my arduino zero) ! But there's some small disadvantage now: compared to the other two topboards, this MCU has no EEPROM anymore (that can survive switching off the MCU and/or flashing the MCU)... So I expected, that you put some small (serial) EEPROM or FRAM onto this new topboard.
I already posted a question about this on May 30, 2016 and got some interresting answers : title is "Real Time Clock on Industruino".
Your answer
Please try to give a substantial answer. If you wanted to comment on the question or answer, just use the commenting tool. Please remember that you can always revise your answers - no need to answer the same question twice. Also, please don't forget to vote - it really helps to select the best questions and answers!
Keep Informed
About This Forum
This community is for professionals and enthusiasts of our products and services.
Read GuidelinesQuestion tools
Stats
| Asked: 12/19/16, 10:39 AM |
| Seen: 3944 times |
| Last updated: 12/19/16, 8:09 PM |
What about the GPRS module I saw on the blog ? Any release date for it ?