Industruino
Help

com port changes during upload

Hi,

I'm experiencing this problem on an (older) model IND.I/O.

Same as on https://industruino.com/forum/help-1/question/com-port-changes-during-upload-781

Could you please share the fix for this situation?

I've tried changing out cables, updating drivers, ...

 

 

bdc
bdc
10
| 0 0 0
Asked on 7/10/21, 8:39 AM
0
vote
1373 Views

Hi, that linked issue turned out to be unrelated to the Industruino, a network issue blocking the Industruino's normal operation. Have you tried with the standard Blink sketch (change LED_BUILTIN to 26, the LCD backlight) and then send us a screenshot of the console with the error, after enabling 'verbose' mode in your IDE preferences. Please send to connect@industruino.com so we can check what's going on, also confirm if you are using the D21G version of Industruino.

If that upload works (allows you to upload several times without having to do a manual reset on the topboard, and afterwards the LCD backlight is blinking slowly), then the problem must be in the code you are trying to upload, e.g. using Serial where you should be using SerialUSB.

 

 

 

Tom
Tom
5675
| 1 1 3
Answered on 7/12/21, 1:16 AM
0
vote

Your answer

Please try to give a substantial answer. If you wanted to comment on the question or answer, just use the commenting tool. Please remember that you can always revise your answers - no need to answer the same question twice. Also, please don't forget to vote - it really helps to select the best questions and answers!

Ask a Question

Keep Informed

About This Forum

This community is for professionals and enthusiasts of our products and services.

Read Guidelines

Question tools

65 follower(s)

Stats

Asked: 7/10/21, 8:39 AM
Seen: 1373 times
Last updated: 7/12/21, 1:16 AM