D21G uploader in Mac

Tom,

I am sorry: I missed enabling verbose during upload, just for compilation !

The command used in my Mac is bossac as well.

btw please find below my verbose output and in bold the bossac command:

.......

Lo sketch usa 54176 byte (20%) dello spazio disponibile per i programmi. Il massimo è 262144 byte.
Forzo il reset aprendo e chiudendo a 1200bps la porta /dev/cu.usbmodem1461
PORTS {/dev/cu.Bluetooth-Incoming-Port, /dev/cu.MALS, /dev/cu.SOC, /dev/cu.usbmodem1461, /dev/tty.Bluetooth-Incoming-Port, /dev/tty.MALS, /dev/tty.SOC, /dev/tty.usbmodem1461, } / {/dev/cu.Bluetooth-Incoming-Port, /dev/cu.MALS, /dev/cu.SOC, /dev/cu.usbmodem1461, /dev/tty.Bluetooth-Incoming-Port, /dev/tty.MALS, /dev/tty.SOC, /dev/tty.usbmodem1461, } => {}
PORTS {/dev/cu.Bluetooth-Incoming-Port, /dev/cu.MALS, /dev/cu.SOC, /dev/cu.usbmodem1461, /dev/tty.Bluetooth-Incoming-Port, /dev/tty.MALS, /dev/tty.SOC, /dev/tty.usbmodem1461, } / {/dev/cu.Bluetooth-Incoming-Port, /dev/cu.MALS, /dev/cu.SOC, /dev/tty.Bluetooth-Incoming-Port, /dev/tty.MALS, /dev/tty.SOC, } => {}
PORTS {/dev/cu.Bluetooth-Incoming-Port, /dev/cu.MALS, /dev/cu.SOC, /dev/tty.Bluetooth-Incoming-Port, /dev/tty.MALS, /dev/tty.SOC, } / {/dev/cu.Bluetooth-Incoming-Port, /dev/cu.MALS, /dev/cu.SOC, /dev/cu.usbmodem1461, /dev/tty.Bluetooth-Incoming-Port, /dev/tty.MALS, /dev/tty.SOC, /dev/tty.usbmodem1461, } => {/dev/cu.usbmodem1461, /dev/tty.usbmodem1461, }
Found upload port: /dev/cu.usbmodem1461
/Users/stefanotosi/Library/Arduino15/packages/industruino/tools/bossac/1.7.0-industruino/bossac-0x4000 -i -d --port=cu.usbmodem1461 -U true -i -e -w -v /var/folders/5m/yl7dz0tx00b46pbgdcs3vs3w0000gn/T/arduino_build_588230/dumDab.ino.bin -R 
Set binary mode
readWord(addr=0)=0x20007ffc
readWord(addr=0xe000ed00)=0x410cc601
readWord(addr=0x41002018)=0x10010305
version()=v2.0 [Arduino:XYZ] Aug  1 2017 11:04:45
chipId=0x10010005
Connected at 921600 baud
readWord(addr=0)=0x20007ffc
readWord(addr=0xe000ed00)=0x410cc601
readWord(addr=0x41002018)=0x10010305
Atmel SMART device 0x10010005 found
write(addr=0x20004000,size=0x34)
writeWord(addr=0x20004030,value=0x10)
writeWord(addr=0x20004020,value=0x20008000)
Device       : ATSAMD21G18A
readWord(addr=0)=0x20007ffc
readWord(addr=0xe000ed00)=0x410cc601
readWord(addr=0x41002018)=0x10010305
Chip ID      : 10010005
version()=v2.0 [Arduino:XYZ] Aug  1 2017 11:04:45
Version      : v2.0 [Arduino:XYZ] Aug  1 2017 11:04:45
Address      : 16384
Pages        : 3840
Page Size    : 64 bytes
Total Size   : 240KB
Planes       : 1
Lock Regions : 16
Locked       : readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
none
readWord(addr=0x41004018)=0
Security     : false
Boot Flash   : true
readWord(addr=0x40000834)=0x7000a
BOD          : true
readWord(addr=0x40000834)=0x7000a
BOR          : true
Arduino      : FAST_CHIP_ERASE
Arduino      : FAST_MULTI_PAGE_WRITE
Arduino      : CAN_CHECKSUM_MEMORY_BUFFER
Erase flash
chipErase(addr=0x4000)
done in 0.797 seconds

Write 54624 bytes to flash (854 pages)
write(addr=0x20005000,size=0x1000)
writeBuffer(scr_addr=0x20005000, dst_addr=0x4000, size=0x1000)

[==                            ] 7% (64/854 pages)write(addr=0x20005000,size=0x1000)
writeBuffer(scr_addr=0x20005000, dst_addr=0x5000, size=0x1000)

[====                          ] 14% (128/854 pages)write(addr=0x20005000,size=0x1000)

etc etc

• Comment
• Edit
• Delete
• Convert as a comment

Stefano Tosi

Stefano Tosi

4

| 1 1 2

Answered on 9/24/18, 8:19 AM

0

vote

Hi Stefano,

Can you switch on verbose output for compilation and upload.

On my Linux system, i see about 10 orange lines before the output you quote, and just before that, in white, the bossac command, after a line 'Found upload port: /dev/ttyACM0'

it looks like this:

/home/tom/.arduino15/packages/industruino/tools/bossac/1.7.0-industruino/bossac-0x4000 -i -d --port=ttyACM0 -U true -i -e -w -v /tmp/arduino_build_363388/sketch_name.ino.bin -R 

• Comment
• Edit
• Delete
• Convert as a comment

Tom

Tom

5675

| 1 1 3

Answered on 9/22/18, 12:39 AM

0

vote