Real time clock in Industruino
has anyone programmed a real-time clock in Industruino ? I would like to program some time-related actions (occupancy schedule, for instance).
You'll need an RTC that uses SPI like the SparkFun DeadOn RTC (DS3234). Most RTC boards use I2C and will have an address conflict with the ADC chip on the Industruino, see this post:
https://industruino.com/forum/help-1/question/rtc-i2c-address-conflict-120
As far as I know, Industruino doesn't have a RTC onboard.
The best solution is to get a DS1307 RTC and connect it to the I2C pins.
This can be done externally or internally.
Then there are many libraries available.
Your answer
Please try to give a substantial answer. If you wanted to comment on the question or answer, just use the commenting tool. Please remember that you can always revise your answers - no need to answer the same question twice. Also, please don't forget to vote - it really helps to select the best questions and answers!
Keep Informed
About This Forum
This community is for professionals and enthusiasts of our products and services.
Read GuidelinesQuestion tools
Stats
| Asked: 5/30/16, 5:35 PM |
| Seen: 3594 times |
| Last updated: 5/31/16, 2:53 PM |
What Gary says is true, actually I used it on a Proto board, if you have an I/O kit the simplest solution is to use SPI.