Industruino Proto kit

52.00 52.00 52.0 EUR

Product not available

Add to Cart


30-day money-back guarantee
Shipping from Belgium or HK

Description

With this product you will be able to permanently install your Arduino application in no-time. Whether you use it for automation projects, data loggers or an interactive art installation, Industruino offers you ruggedness, plenty of features and low cost. 

The Proto kit offers a large prototyping area to add your own circuitry as well as the following features:

1. A 14 pin IDC expansion port to easily connect external modules such as the new Ethernet module or your own pcb/module hosting the same connector.

2. A 2A switching voltage regulator taking any input voltage between 7-28V and generating a stable 5V output for the MCU and your own components.

The prototyping area is generally used for two purposes:

1. To integrate a one-off Arduino based project into a fully enclosed solution. 

2. To prototype a design before making a custom Baseboard for mass production. 

Industruino Proto is sold in form of a kit consisting of a topboard pcb, Proto baseboard pcb, mounting hardware and enclosure with button panel. With these parts it takes only about 3 minutes to assemble your Industruino.

Features

  • DIN-rail mountable 
  • Fully enclosed
  • Prototyping area with re-routable connections using jumpers
  • 14p IDC expansion port
  • 7-28V->5V/2A switching voltage regulator.
  • All I/O and power available through detachable screw connectors
  • Enclosure made from biodegradable polymer
  • 128x64 pixels LCD with backlight 
  • 3 button membrane panel 
  • Pre-loaded with interactive LCD menu firmware (code examples available for download below)
  • Fully compatible with the Arduino IDE

Tech. Details

  • Atmega 32u4 or AT90USB1286 microcontroller
  • Operating Voltage 5V
  • Supply Voltage: 7-28V
  • Digital I/O Pins: 17
  • PWM Channels: 6 (32u4 model) / 4 (1286 model)
  • Analog Input Channels: 7,  off which 6 are shared with digital I/O pins (32u4) / 5 (1286).
  • DC Current per I/O Pin 40 mA
  • DC Current for 3.3V Pin 50 mA
  • Flash Memory 32 KB (32u4) / 128KB (1286).
  • SRAM 2.5 KB
  • EEPROM 1 KB
  • Clock Speed 16 MHz
  • U8G library compatible LCD
  • 3 button membrane panel connected to analog input A5 on 32u4 / D23-D25 on 1286 models.
  • LCD backlight PWM controlled using output D13 (32u4) / D26 (1286)

Documentation

Industruino with Proto Baseboard

Pinout Diagram of Industruino Proto

Downloads

Industruino PROTO support files

The Industruino PROTO board definition files and libraries can be downloaded here

PROTO 32u4 Pinout Map

Download

PROTO 1286 Pinout Map

Download

PROTO 32u4 Schematic

Download

PROTO 1286 Schematic

Download