Issues with Arduino IDE board definition 1.0.1

I have a complex working code base running well on boards version 1.0.0 - the moment I update to board definition 1.0.1, the I2C subsystem seems to be completely unstable - using RTC or EEPROM - there a random lockups and unpredictable operations.

I have used two diferent I2C libraries for the eeprom with similar results on board version 1.0.1 - those same libraries work corectly on boards 1.0.0

Has anyone else seen this behaviour - my topboard is v.17-3117

• Comment
• Close
• Edit
• Delete

Shane van Jaarsveldt

Shane van Jaarsveldt

32

| 3 1 2

Asked on 1/16/18, 2:48 PM

0

vote

3501 Views

Hi Shane, i have tested the simple RTC and EEPROM demo sketches again on 1.0.1 and i don't find any problems. Could you try with those demo sketches. Are you using I2C for anything else except the standard Indio library, RTC, EEPROM? https://github.com/Industruino/democode

Convert as an answer

Tom

on 1/18/18, 11:24 PM

Thanks Tom 

I will use a new unit and test. I2C only used for RTC and eeprom. I’ll let you know. 

Cheers

Sent from my mobile phone, please excuse brevity or errors...

On 19 Jan 2018, at 01:24, Tom <tomtobback@gmail.com> wrote:

Hi Shane, i have tested the simple RTC and EEPROM demo sketches again on 1.0.1 and i don't find any problems. Could you try with those demo sketches. Are you using I2C for anything else except the standard Indio library, RTC, EEPROM? https://github.com/Industruino/democode

--
Tom
Sent by Industruino using Odoo about Forum Post Issues with Arduino IDE board definition 1.0.1

Convert as an answer

Shane van Jaarsveldt

on 1/19/18, 5:18 AM

Testing results

Debug output to SerialUSB - BSP1.0.0

00:00:01:POST:SYS/Init/AB061n

00:00:01:POST:WDT/Init/16000ms

00:00:01:POST:RTC:Friday 19 January 2014 13:21:19

13:21:19:POST:EEP/Init/OK

15:21:19:POST:xIO/Init

15:21:19:s01 set as input

15:21:19:s02 set as input

15:21:19:s03 set as input

15:21:19:s04 set as input

15:21:19:d01 set as output

15:21:19:d02 set as output

15:21:19:d03 set as output

15:21:19:d04 set as output

15:21:19:a01 set to input type 0-10V

15:21:19:a02 set to input type 0-10V

15:21:19:a03 set to input type 0-10V

15:21:19:a04 set to input type 0-10V

15:21:19:v01 set to output type 0-10V

15:21:19:v02 set to output type 0-10V

15:21:19:POST:DEV/ID:0A0017110000

15:21:19:POST:SD/Init.../SD:OK/SD:Type SDHC/SD:FAT:32/Size 980 MB

Updated to 1.0.1

and now seems to work - I will test more and let you know if any issues.

I am using following libraries

WDT - #include <MCP7940.h> // includes wire.h 

EEPROM - from github

## **EEPROM Library V1.0** for Industruino D21G

**Written by:** _Xabier Garmendia - EA2EGA_. - _Ingran Engineering S.L._.  

Based on the work of: David A. Mellis and Christopher Andrews

It uses I2C_EEPROM as well and works with the “standard” functions of the IDE bundled EEPROM.h for AVR

Regards Shane

 

Shane van Jaarsveldt

shane@brightenup.co.za  |  http://www.brightenup.co.za

Tel: +27 11 469 4750  Cel: +27 82 601 0499  Fax: +27 11 469 3370 
P.O. BOX 64, WITKOPPEN, 2068, SOUTH AFRICA

On 19 Jan 2018, at 07:18, Shane van Jaarsveldt <shane@brightenup.co.za> wrote:

Thanks Tom 

I will use a new unit and test. I2C only used for RTC and eeprom. I’ll let you know. 

Cheers

Sent from my mobile phone, please excuse brevity or errors...

On 19 Jan 2018, at 01:24, Tom <tomtobback@gmail.com> wrote:

Hi Shane, i have tested the simple RTC and EEPROM demo sketches again on 1.0.1 and i don't find any problems. Could you try with those demo sketches. Are you using I2C for anything else except the standard Indio library, RTC, EEPROM? https://github.com/Industruino/democode

--
Tom
Sent by Industruino using Odoo about Forum Post Issues with Arduino IDE board definition 1.0.1

Convert as an answer

Shane van Jaarsveldt

on 1/19/18, 2:02 PM

Post